Plating Products
- Metal Pre-treatment Agents:Buff lint removal, derusting, plating activation, and other treatment agents
- Nickel plating additives:Brightening agents, pit preventing agents, soldering improvement agents
- Alloy plating solutions:Black and white-colored. Non-allergenic alloy plating for nickel allergies.
- Metal Discoloration Prevention Agents:Anti-rusting agents for metals, and water-soluble anti-rusting coating agents.
- Plating Peeling Agents:Plating peeling agents for nickel, copper, and alloy plating, and stainless steel tools
Metal Pre-treatment Agents
Activator 727:Washing agent replacement for solvent
A low-alkaline rinsing agent made with a biodegradable surfactant.
Activator AL-EX:Electrolytic cleaning agent for aluminum alloys
Perfect as a pretreatment for coatings, plating, alodine, and alumite.
High Clean A-8-:Degreasing assistant for acid wash
Effective for degreasing, inhibiting corrosion, and preventing mist.
High Clean C-100:Neutral rust removal agent
Derusts iron, steel, and copper alloy, and removes oxide film. No substrate erosion or hydrogen brittleness.
High Clean C-300:Acid rust removal agent
Derusts iron and steel, and removes scale. No hydrogen brittleness.
Neutral derusting agent KH-02:Neutral rust removal agent
Derusts iron, steel, and copper alloy, and removes oxide film and scale.There is also an antirusting effect.
Techno Clean F-10:Neutral rust removal agent
Derusts for iron, steel, and copper alloy, and removes oxide film and scale.
Nickel refresher:Nickel plating activation
Removes inactivated film from nickel plating. Perfect for rejuvenating and activating nickel plating.
Activation agent:Nickel plating activation
Immersion after nickel plating improves the covering of chromium plating.
Nickel plating additives
High Nickel AD(glossy and soft type):Stationary glossing agent
Uniform electrodeposition. Minimal glossing agent decomposition byproducts. Low stress on the inner parts,leading to a soft, malleable film.
Luster R, Luster SV(high gloss, leveling):Stationary glossing agent
High leveling type with superior gloss. With a thin, yet glossy plating, the time required for plating can be shortened.
High Nickel BAD(glossy and soft type):Revolving glossing agent
Giving a soft plating film, this additive allows for superior secondary processing. A deep gloss is achieved. With minimal corrosion of the glossing agent, this is an economical choice.
High Nickel VL(high gloss, leveling):Revolving glossing agent
Superior gloss and leveling. The plating film is soft, with superior malleability. With good covering, this is suitable for fine component plating.
High Nickel FBN-01(high performance type):Revolving glossing agent
With superior gloss and leveling, a white gloss is achieved. With good covering, even components with low current have an adequate gloss. Giving a soft plating film, this additive allows for superior secondary processing.
High Nickel 200:Special nickel glossing agent
A non-leveling glossing agent. It achieves a uniform gloss over a wide current density range.
High Nickel S:Special nickel glossing agent
A glossing agent for sulfamate baths. It achieves a gloss that doesn't increase stress on the substrate.
High Nickel 101:Nickel plating Pit preventing agent
Pit prevention due to minute amount of additive.
High Solder Series:Agent with improved solder wettability
The solder wettability of nickel plating is improved.
Alloy plating solutions
Luna Guard Series:Substitution gold plating
FC-X:Cu-Sn
Black Beauty:Sn-Co
Aqualoy TC:Sn-Co
Bluish white nonmagnetic plating
Replacement for chromium plating
Replacement for chromium plating
Nobloy SNC:Sn-Ni-Cu
Pale black nonmagnetic plating
Pure White:Sn-Cu-Zn
Sharp silvery-white nonmagnetic plating
White Metal A:Ni-Co-W
A white hue
Royal White:Sn-Cu-Zn
Nonmagnetic plating with a rhodium hue
Safe for nickel allergies
Safe for nickel allergies
Hardloy NW:Ni-W
Alloy plating with high hardness and corrosion and abrasion resistance
Metal Discoloration Prevention Agents
Tetsu Guard SP:Temporary anti-rusting for iron and steel
Chromium free. Work is simple, as the dipping treatment can be done at room temperature. Contains no PRTR applicable substances.
Nickel Guard SP:Discoloration prevention for electroless nickel plating
Chromium free. Work is simple, as the dipping treatment can be done at room temperature. Contains no PRTR applicable substances.
Kapa Guard SP:Discoloration prevention for copper and copper alloy
Chromium free. Work is simple, as the dipping treatment can be done at room temperature. Contains no PRTR applicable substances.
Chromium-Free ACR:Discoloration prevention for trivalent chromium and tin-based alloy plating
Chromium free. Work is simple, as the dipping treatment can be done at room temperature. Contains no PRTR applicable substances.
Neutralized Anti-Rusting Agent MR:Temporary anti-rusting for iron and steel
Chromium free, with simple waste water management.
Draining Anti-Rusting Agent High Cut S:General anti-rusting for metal
Superior draining and anti-rusting.
Aku Coat N:Water-soluble anti-rust coating
A clear-type acrylic resin that doesn't require use of a thinner, lowering the risk of fires.
Plating Peeling Agents
High lip:Peeling for nickel and copper plating
Peeling for nickel and copper plating on top of an iron substrate. Cyanide type.
Arrow lip:Peeling for tin-based alloy plating
Peeling for tin-based alloy plating on top of nickel plating. Cyanide-free.
Electrolytic Peeling Agent ES:Peeling for stainless steel tool plating
Peeling speed is quick with 2 solutions without corroding stainless steel.
Electrolytic Peeling Agent NEW ES:Peeling for stainless steel tool plating
The metal is deposited with a single solution.